China high quality KINGSTEEL OEM 49501-3X000 495013X000 Automotive Car Transmission System Auto Parts Drive Shaft For Hyundai Avante ELANTRA 2011 with Hot selling

Design: Elantra
12 months: 1993-2016
OE NO.: 49501-3X000
Car Fitment: Hyundai
Measurement: OEM STHangZhouRD, Common Size
Material: Metal
Design Variety: OEM STHangZhouRD
Guarantee: twelve Months, 12 Months
Automobile Make: For Hyundai Avante ELANTRA
Quality: Large-Top quality
Coloration: Picture Exhibits
Packing: CZPT Manufacturer Packing
MOQ: 20pcs
Payment: T/T. 30% Deposit.Western Union
Delivery time: fifteen-forty five Days
Certification: ISO9001/TS16949
Provider: Expert Provider
Port: HangZhou/ZheJiang

Quality Assurance Manufacturing unit Price Substantial Quality,OIL RETURN PIPE For KIA HYUNDAI model,welcome to “contact us” for furtherinformation,Help you preserve time to locate the product you need Specification

Brand IdentifyKINGSTEEL
Product NameDrive Shaft
ApplicationTrasmission Parts
MOQ20 Pcs
OEM NO 49501-3X000
Payment termsPayPal / T/T / L/C
Delivery time10-twenty five Days
QualityHigh-Good quality
ServiceOEM ODM
So our products are large top quality and far more durable.The most importantly, all King Metal autoparts with 1 calendar year guarantee. If youdon’t have considerably time So our items are large good quality and a lot more sturdy.The most importantly, all King Steel autoparts with1 year warranty.If you do not have much timeYou can>>>Leave Concept <<< directlyOur professional staff will communicate with you Our professional staff will communicate with you Our rewardsWe focus in Korean vehicle parts1 Suspension parts:suspension bushing 、Control arm、Ball joint、shock absorber、Shock strut 2 Steering system:Bearings、Axle shaft、C.V joint、Power steering rack、Power steering pump、Stabilizer website link 、Tie rod and Rack end、Steering knuckle 3 Brake areas : BRAKE PADS、Brake Drum and disc、Brake shoe、Brake caliper、Brake cyliner、 Brake booster、 Brake adjuster 4 Trasmission system:Tripod Joints、Clutch disc and cover、Clutch grasp cylinder、Universal joints Centre bearing 5 Eletric system:abs pace sensor、FUEL PUMP、FUEL PUMP ASSY、Clock springs、Ignition coil Sensor、Switch、sparkplug、Starter、Alternator、Air Compressor 6 Engine parts:Oil Pump、Air Filter Housing、TENSIONAL PULLY、Engine mount、Carburetor and kits、FAN CLUTCH、Belt parts、Air filter、Fuelfilter、Oil filter、Transmission Filter、Water pump、Piston and Ring Set、Timing chain、Air house、Gasket kits、Clyinder head、Turbocharger components Radiator 7 Entire body exterior:Front Fender、Oil Seal、Wiper Blades、Front Bumper、Lamp、front grille8 High-good quality original, produced in ZheJiang , created in Mainland China, there are more than 4000 sq. meters of warehouse, a lot of components are in inventory.9 You should come to feel totally free to contact us for additional information,,Help you help save time to uncover the solution you require
For Automobile ModelAuto designAuto SystemsProduct ChecklistQuantity
Fuel Filters1000
Oil Filters588
Spark Plugs99
Motor Mounts899
Ignition Coils300
Ignition Cable86
Timing Chain Kit100
Cylinder Head Gaskets350
Suspension MethodsBall Joints800
Management Arms552
Rubber Bushing987
Shock Absorber Springs153
Shock Absorbers1614
Stabilizer Links1103
Suspension Strut Bearings240
Brake MethodsBrake Pads2150
Brake Discs850
Brake shoes320
Brake Cables364
Brake Hoses887
Steering ProgramsTie Rod Ends450
Tie Rods (Rack Stop)400
Steering Equipment Boots602
Steering Gears800
Conditioning MethodsCabin Filters350
Transmission SystemsC.V. Joints899
C.V. Joint Boots500
Tensioner & Belts1140
Wheel Hubs703
Fluid & Chemical substancesAntifreeze4
Brake Lubricants2
Engine Lubricants42
Transmission Fluids15
Other Automobile AreasOther Vehicle Components8074
Tire Mend Tools57
Auto Fastener & Clip881
Lug Nuts & Areas233
Other Automobile Equipment20
HangZhou Jiesite Autoparts is a foremost manufacturer and exporter in HangZhou of China, specializing in manufacturing and exporting all sorts of car areas for South Korean vehicles. Our primary solution lines are automotive drive method, steering technique, suspension technique, motor program, brake method, clean system, cooling method and other people. The factories we invested and joined have received ISO9001:2000 and TS16949 certificates. We source expert support, prompt reply, timely shipping and delivery, superb quality and best cost to our consumers. Fulfillment and excellent credit rating to every consumer is our precedence. We concentrate on every detail of purchase processing for consumers until they have acquired safe and sound items with very good logistics services and affordable value. Relying on this, our items are sold extremely nicely in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the enterprise philosophy of ‘customer initial, forge ahead’, we sincerely welcome clients from at house and overseas to cooperate with us. If you don’t have significantly timeYou can>>>Leave Message <<< directlyOur professional staff will communicate with you Our professional staff will communicate with you FAQ 1. who are we?We are based in ZheJiang , China, commence from 2017,promote to South The usa(17.00%),Southeast Asia(15.00%),Africa(ten.00%),Mid East(ten.00%),Central America(ten.00%),South Asia(ten.00%),Jap Asia(9.00%),North The united states(5.00%),Oceania(5.00%),Japanese Europe(3.00%),Western Europe(2.00%),Northern Europe(2.00%),Southern Europe(2.00%). There are total about eleven-50 individuals in our workplace.2. how can we promise quality?Constantly a pre-production sample just before mass productionAlways closing Inspection prior to shipment3.what can you buy from us?Auto Motor Methods,Automobile Transmission Systems,Auto Steering Techniques,Vehicle Brake Methods,Automobile Suspension Systems4. why should you acquire from us not from other suppliers?HangZhou Jiesite autoparts has in car parts for 10+ years ,1.A large of stock2.Specialist export company3.Take tiny order4.A lot of item categories5.japanese elements best choice5. what companies can we offer?Acknowledged Supply Conditions: FOB,CFR,CIF,EXW,Specific Delivery;Accepted Payment Forex:USD,EUR,HKD,CNYAccepted Payment Variety: T/T,L/C,MoneyGram,PayPal,Western Union,Money,EscrowLanguage Spoken:English,Chinese,Spanish

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!


If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China high quality KINGSTEEL OEM 49501-3X000 495013X000 Automotive Car Transmission System Auto Parts Drive Shaft For Hyundai Avante ELANTRA 2011     with Hot selling		China high quality KINGSTEEL OEM 49501-3X000 495013X000 Automotive Car Transmission System Auto Parts Drive Shaft For Hyundai Avante ELANTRA 2011     with Hot selling

Drive Shaft

As one of the drive shaft manufacturers, suppliers, and exporters of mechanical products, We offer drive shafts and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the drive shaft.

Recent Posts